Pittsburgh Machine RAMS 24-28

CAPACITY

24 GA. MAX. -  28 GA. MIN. MILD STEEL

APPROX. SPEED

35 FPM

DIMENSIONS

32” LONG X 16 3/4” WIDE X 9” HIGH

APPROX. WEIGHT

110 LBS.

The unit comes with a 1/2 hp electric motor, 115/208-230V, 5.4 amps 60hz, 1ph. We use Torrington needle bearings and hardened steel components throughout                  (62 Rockwell).  The cabinet and optional stand are heavy gauge steel with a Hammertone green finish.

Pittsburgh Machine 20 ga
RAMS-2006

CAPACITY

20 GA. MAX. -  26 GA. MIN. MILD STEEL

APPROX. SPEED

25 FPM

DIMENSIONS

36” LONG X 17” WIDE X 34” HIGH

APPROX. WEIGHT

350 LBS.

The unit comes with a 1 hp electric motor, 115/208-230V, 1,725 RPM 60hz, 1ph. We use Torrington needle bearings and hardened steel components throughout                  (62 Rockwell).  The cabinet is gauge steel with a Hammertone green finish.

Power Flanger 24 ga.
RAMS-2003

CAPACITY

24 GA. MAX. -  28 GA. MIN. MILD STEEL

DIMENSIONS

16” LONG X 9 1/4” WIDE X 6 1/4” HIGH

APPROX. WEIGHT

30 LBS.

The unit can be mounted to the RAMS 24-28 Pittsburg Machine. The RAMS-2003 Power Flanger will form a 7/32” right angle flange on either straight or curved pieces. It has an adjustable “auto-guide”, which can be set to automatically hold the metal for turning the flange on both, a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.

Power Flanger - 20 ga
RAMS-2008

CAPACITY

20 GA. MAX. -  24 GA. MIN. MILD STEEL

DIMENSIONS

16” LONG X 9 1/4” WIDE X 6 1/4” HIGH

APPROX. WEIGHT

30 LBS.

The unit can be mounted to the RAMS-2006 20 gauge Pittsburg Machine. The RAMS-2008 20 gauge Power Flanger will form a 7/32” right angle flange on either straight or curved pieces. It has an adjustable “auto-guide”, which can be set to automatically hold the metal for turning the flange on both, a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.

20 ga Stand Alone
Power Flanger
RAMS-2007

CAPACITY

20 GA. MAX. -  24 GA. MIN. MILD STEEL

DIMENSIONS

36” LONG X 17” WIDE X 34” HIGH

APPROX. WEIGHT

204 LBS.

The unit comes mounted in a heavy duty cabinet. The RAMS-2007 Power Flanger will form a 7/32” right angle flange on either straight or curved pieces. It has an adjustable “auto-guide”, which can be set to automatically hold the metal for turning the flange on both, a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.

Hand Flanger
RAMS-2002

CAPACITY

20 GA.  MILD STEEL

DIMENSIONS

8” LONG X 10” WIDE X 26” HIGH

APPROX. WEIGHT

20 LBS.

7/32” hand flanger (for duct elbows) for inside and outside radus, unique design using Torrington needle bearings and hardened rollers. Bench mounted with “EZ Edge Finder.

CAPACITY

20 GA.  MILD STEEL

DIMENSIONS

8” LONG X 4” WIDE

APPROX. WEIGHT

20 LBS.

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades. Blades can be flipped over to use the other side.

Cleat Bender
RAMS-2004

CAPACITY

20 GA.  MILD STEEL

DIMENSIONS

31” LONG X 9” WIDE X 9” HIGH

APPROX. WEIGHT

70 LBS.

A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Torrington needle bearings are used. A quick release is built into the lower handle, which has 3-positions available.